Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show affinity-groups
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
259
■ Example(s)
When the parameter is specified, the details of the specified affinity group are displayed.
# Affinity Group No.6
A
# Affinity Group Name AG006
B
# LUN Volume Status Size(MB) Multi-Group
# No. Name Volume
# 3
3 VOLUME_003 Available 32 No
C D E F G H
A: Affinity group number
B: Affinity group name
C: Logical unit number (LUN)
D: Serial number
E: Volume name
F: Volume status
G: Volume size
H: It shows whether or not the same volume identifier is defined between affinity groups.
If the same definitions exist, "Yes" is displayed in target volumes. Otherwise, "No" is displayed.
The following example displays a summary of all the existing affinity groups. The multi-group volume
information flag is also displayed:
CLI> show affinity-groups
Affinity Group Multi-Group
No. Name Volumes
4 AG004 Yes
5 AG005 No
6 AG006 Yes
The following example displays details of affinity group #6:
CLI> show affinity-groups -ag-number 6
Affinity Group No.6
Affinity Group Name AG006
LUN Volume Status Size(MB) Multi-Group
No. Name Volume
1 1 VOLUME_001 Available 32 No
2 2 VOLUME_002 Available 32 No
3 3 VOLUME_003 Available 32 No
4095 5 VOLUME_005 Available 32 No
To Next Page
Loading...
