Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set lun-group
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
264
■ Example(s)
The following example changes the LUN group named "AGP001". The new name is "NEW_AGP002":
CLI> set lun-group -lg-name AGP001 -name NEW_AGP002
In the following example, the first command creates the LUN group named "AGP001". This LUN group will
contain a definition of the association of consecutive volumes #0 – #10 and consecutive LUNs #0 – #10. The
second command adds other definitions to the LUN group. Consecutive volumes #101 – #105 will be
associated with LUNs #11 – #15. Existing definitions are retained after the second command is executed.
Only the definitions specified in the second command are added:
CLI> create lun-group -name AGP001 -volume-number 0-10 -lun 0-10
CLI> set lun-group -lg-name AGP001 -volume-number 101-105 -lun 11-15
To Next Page
Loading...
