Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-affinity
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
275
■ Example(s)
The following example sets the relationship between host interface CA#0 Port #0 on CM#0, affinity group #1,
and host #1:
CLI> set host-affinity -port 000 -ag-number 1 -host-number 1
The following example sets the relationship between host interface CA#0 Port #0 on CM#1, affinity groups
#1 – #3, and host #1 – #3:
CLI> set host-affinity -port 100 -ag-number 1-3 -host-number 1-3
The following example sets the relationship between the same affinity group #1 and both host #1 and #2:
CLI> set host-affinity -port 000 -ag-number 1 -host-number 1,2
The following example sets the relationship between the host interface CA#0 Port #0 on CM#1 and CA#0
Port#1 on CM#1, the affinity group named "AGP001", and the host named "HBA001":
CLI> set host-affinity -port 100,101 -ag-name AGP001 -host-name HBA001
(identical with the following)
CLI> set host-affinity -port 100 -ag-name AGP001 -host-name HBA001
CLI> set host-affinity -port 101 -ag-name AGP001 -host-name HBA001
The following example sets the relationship between the port group named "PG001", the affinity group
named "AG001", and the host group named "HG001":
CLI> set host-affinity -port-group-name PG001 -ag-name AG001 -host-group-name HG001
The following example sets the relationship between port group #1, all of the hosts, and affinity group #1.
Host response #1 is assigned to port group #1:
CLI> set host-affinity -port-group-number 1 -ag-number 1 -host-response-number 1
The following example sets the relationship between port group #1, all of the hosts, and LUN group #1. Host
response #1 is assigned to port group #1:
CLI> set host-affinity -port-group-number 1 -lg-number 1 -host-response-number 1
To Next Page
Loading...
