EasyManua.ls Logo

Fujitsu Eternus DX90 S2 - CLI User Authority; Note for Specifying FTP Server; Command Descriptions

Fujitsu Eternus DX90 S2
756 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Overview
1.10 CLI User Authority
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
31
1.10 CLI User Authority
User authority is determined by the role and user policy. For details on roles and user policies, refer to "4.1
User Management" (page 356).
1.11 Note for Specifying FTP Server
If an FTP server is specified by domain name format, name resolution is performed by the DNS servers
assigned to the specified Ethernet port. If an FTP server is specified by an IP address, an appropriate Ethernet
port is automatically assigned by the system. Even though designation of an Ethernet port by using CLI is not
required, doing so allows the operator to specify which network the FTP server belongs to.
1.12 Command Descriptions
This section explains the commands in a functional order. Each command topic includes one or more of the
following sections.
Description
A description of the command
Syntax
The command syntax
Parameters
A description of parameter(s)
Output (only for reference commands)
A description of information displayed by the command
Example(s)
One or more examples of the command

Table of Contents

Other manuals for Fujitsu Eternus DX90 S2

Related product manuals