Fujitsu Eternus DX90 S2 - Page 316

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show port-groups
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
316
■ Example(s)
When the parameter is specified, the details of the specified port group are displayed.
# Port Group CA Type
# No. Name
# 0
pg FC
A B C
# <Port List>
# CM#0 CA#0 Port#1
D
#
# Port Group CA Type
# No. Name
# 1 pg1 FC
# <Port List>
# CM#0 CA#0 Port#0
# CM#0 CA#0 Port#1
A: Port group number
B: Port group name
C: CA type
D: Port number
The following example displays a summary of all the existing port groups:
CLI> show port-groups
Port Group CA Type
No. Name
0 pg FC
1 pg1 FC
The following example displays details of port group #0:
CLI> show port-groups -port-group-number 0
Port Group CA Type
No. Name
0 pg FC
<Port List>
CM#0 CA#0 Port#1
The following example displays the details of all the port groups:
CLI> show port-groups -all
Port Group CA Type
No. Name
0 pg FC
<Port List>
CM#0 CA#0 Port#1
Port Group CA Type
No. Name
1 pg1 FC
<Port List>
CM#0 CA#0 Port#0
CM#0 CA#0 Port#1