Fujitsu Eternus DX90 S2 - Chapter 4 Function;System Settings and Display; 4.1 User Management

ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
356
Chapter 4
Function/System Settings and Display
This chapter explains the commands related to the following functions:
• User account management
• Advanced Copy management
• Network management (Redundant IP/SNMP etc.)
• SSH/SSL security configuration
• Date and Time/NTP
• System configuration (ETERNUS DX Disk storage system name, Box ID, encryption)
• Power synchronization
• Self-Encrypted Disk (SED) authentication settings
• syslog server settings
• Audit log settings
• Key management server linkage function
• Shutdown/system restart
4.1 User Management
This section explains the commands that manage a user account and a password.
4.1.1 Role
Roles define the user roles and the policies based on the definitions that are assigned to each role. Policies
are given to users as roles. There are default roles that are preset in the ETERNUS DX Disk storage system and
user-defined roles (custom roles). The following table shows the roles and their policies.
■ Default roles
The default roles and corresponding policies are shown in the following table.
User policy
Default role
Monitor Admin
Storage
Admin
Account
Admin
Security
Admin
Maintainer
Software
(*1)
Status Display Yes Yes Yes Yes Yes
RAID Group Management Yes Yes Yes
Volume - Create / Modify Yes Yes Yes
Volume - Delete / Format Yes Yes Yes
Host Interface Management Yes Yes Yes
Advanced Copy Management Yes Yes Yes