Fujitsu Eternus DX90 S2 - Delete Ssh-Public-Key

Chapter 4 Function/System Settings and Display
4.1 User Management > delete ssh-public-key
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
371
delete ssh-public-key
This command deletes an existing public key for SSH authentication. Even if a specified user account is
disabled at that time, the SSH public key can be deleted.
■ Syntax
■ Parameter
■ Example(s)
delete ssh-public-key -account-name account_name
-account-name
This parameter specifies an existing user account name with the SSH certificate key registered
for authentication-use. Only one user account name can be specified at once.
The following example deletes the SSH public key for the "manager" user account.
CLI> delete ssh-public-key -account-name manager