Chapter 2 Status Display
2.1 Storage System Status > show enclosure-status
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
39
The following example shows the information that is displayed when all of the enclosures are specified for
the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/DX440 S2, and the ETERNUS DX8100 S2:
CLI> show enclosure-status -type all
Controller Enclosure Information
Location Status Error Code Sensor 1 / Sensor 2
Intake Temp Normal 0x0000 25 (C) / 25 (C)
Exhaust Temp Normal 0x0000 -
Controller Enclosure Status
Controller Module Status/Status Code
CM#0 [Normal / 0xE001]
CM#1 [Normal / 0xE001]
Power Supply Unit Status/Status Code
PSU#0 [Normal / 0xE001]
PSU#1 [Normal / 0xE001]
Disk Status
CE-Disk#0 [Rebuild/Copyback ] CE-Disk#1 [Rebuild/Copyback ]
CE-Disk#2 [Available ] CE-Disk#3 [Broken ]
CE-Disk#4 [Available ] CE-Disk#5 [Available(Predictive Failure)]
CE-Disk#6 [Available(Predictive Failure)] CE-Disk#7 [Present ]
CE-Disk#8 [Present ] CE-Disk#9 [Present ]
CE-Disk#10 [Present ] CE-Disk#11 [Spare ]
Drive Enclosure #1 Information
Location Status Error Code Sensor 1 / Sensor 2
Intake Temp Normal 0x0000 25 (C) / 25 (C)
Exhaust Temp Normal 0x0000 -
Drive Enclosure #1 Status
Expander Status/Status Code
EXP#0 [Normal / 0xE001]
EXP#1 [Normal / 0xE001]
Power Supply Unit Status/Status Code
PSU#0 [Normal / 0xE001]
PSU#1 [Normal / 0xE001]
Disk Status
DE#1-Disk#0 [Available ] DE#1-Disk#1 [Available ]
DE#1-Disk#2 [Available ] DE#1-Disk#3 [Rebuild/Copyback ]
DE#1-Disk#4 [Rebuild/Copyback ] DE#1-Disk#5 [Available ]
DE#1-Disk#6 [Available ] DE#1-Disk#7 [Available(Predictive Failure)]
DE#1-Disk#8 [Available ] DE#1-Disk#9 [Available ]
DE#1-Disk#10 [Available(Predictive Failure)] DE#1-Disk#11 [Broken ]
To Next Page
Loading...
