Chapter 2 Status Display
2.1 Storage System Status > show fru-ce
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
42
Memory Size
Memory size of a controller module.
Parts Number
Parts number
Serial Number
Serial number
Hardware Revision
Hardware version
CPU#n Clock
CPU clock frequency
CM Active EC
An EC number of the active firmware (The current operating firmware)
CM Next EC
An EC number of the stand-by firmware (The generation number of the firmware after the next
power cycle)
BIOS Active EC
An EC number of the active firmware (The current operating firmware)
BIOS Next EC
An EC number of the stand-by firmware (The generation number of the firmware after the next
power cycle)
CM EXP Active EC
An EC number of the active firmware (The current operating firmware) (only for the ETERNUS
DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, and ETERNUS DX8100 S2)
CM EXP Next EC
An EC number of the stand-by firmware (The generation number of the firmware after the next
power cycle) (only for the ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, and
ETERNUS DX8100 S2)
CM#n Internal Parts Status and Status Code (n: The controller module number)
Memory# Memory status and the status code
Memory# Parts Number
Memory parts number
Memory# Serial Number
Memory serial number
Memory# Hard Revision
Memory hard revision
BUD# BUD (Bootup and Utility Device) status and the status code
To Next Page
Loading...
