Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > set rec-multiplicity
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
436
■ Example(s)
The following example sets the REC multiplicity to 5:
CLI> set rec-multiplicity -remote-boxid "00DXL#########ED06F21AUABCPJ000001######" -multiplicity 5
The following example sets the Copy Level to 3.
CLI> set rec-multiplicity -remote-boxid "00DXL#########ED06F21AUABCPJ000001######" -priority-level 3
The following example sets the Copy Schedule Mode to Session balancing.
CLI> set rec-multiplicity -remote-boxid "00DXL#########ED06F21AUABCPJ000001######" -copy-schedule-mode ses-
sion-balancing
To Next Page
Loading...
