Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > delete rec-buffer
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
441
delete rec-buffer
This command is used to delete an existing REC buffer definition.
■ Syntax
■ Parameter
■ Example(s)
delete rec-buffer -partition {0|1|2|3|4|5|6|7}
-partition This parameter specifies the REC buffer group number that is to be deleted. This number starts
from 0. Two or more numbers cannot be specified at the same time. The selectable range is as
follows:
ETERNUS DX90 S2: 0 to 3
ETERNUS DX400 S2 Series: 0 to 7
ETERNUS DX8000 S2 Series: 0 to 7
The following example deletes partition #1:
CLI> delete rec-buffer -partition 1
To Next Page
Loading...
