Fujitsu Eternus DX90 S2 - Show Ais-Connect

Chapter 4 Function/System Settings and Display
4.3 Network Management > show ais-connect
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
547
show ais-connect
This command displays the AIS Connect operation environment.
■ Syntax
■ Parameter
No parameters.
■ Output
show ais-connect
# AIS Connect Function [Enable]
A
# Port [MNT
]
B
# Send Log(Auto) [Enable]
C
# Country Of Installation [392 (JAPAN)
]
D
# Service Contract Responsibility [392 (JAPAN)
]
E
# SSL Server Certification [Enable]
F
# Proxy Server [foo.bar
]
G
# Proxy Port Number [123
]
H
# Proxy Type [HTTP]
I
# Proxy User Name [User1
]
J
# Remote Session [Permit
]
K
# Remote Session Timeout(hour) [3]
L
<Trusted Root Certification Authorities>
Issuer Name [Fujitsu Certification Authority
]
M
Valid From [2012-08-17 13:04:47
]
N
Valid To [2015-08-17 13:04:47
]
O