Fujitsu Eternus DX90 S2 - Show Storage-System-Name

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show storage-system-name
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
563
show storage-system-name
This command displays the ETERNUS DX Disk storage system name.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show storage-system-name
CLI> show storage-system-name
# Name [E2000]
Series name of the system
# Installation Site [FJ]
Installation site
# Contact [xxx.xxx.xxxx]
Contact address
# Description [admin-machine]
Description of the ETERNUS DX Disk storage system
The following example displays the ETERNUS DX Disk storage system name:
CLI> show storage-system-name
Name [DXL-1]
Installation Site [FJ]
Contact [AVRIL]
Description [CALC1]