Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show sed-key-groups
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
599
show sed-key-groups
This command displays the key group and the server certificate.
■ Syntax
■ Parameter
No parameters.
■ Output
show sed-key-groups
# SED Key Group Key Expiration Key Status
# Name Date
# key_group1
2012-07-27 Normal
A B C
# <Detail Information>
# Machine Group Name machine_group1
D
# Security Level High
E
# Recovery Mode Auto
F
# Period 7
G
# Master Server ID 1 (Normal)
H I
# Master Server 10.21.134.198
J
# Slave Server ID 2
(Normal)
K L
# Slave Server 10.21.134.199
M
# <Server Certificate Information>
# Issuer Name Fujitsu Certification Authority
N
# Subject Name Key Management Server
O
# Valid From 2012-08-17 13:04:47
P
# Valid To 2015-08-17 13:04:47
Q
# Serial Number 602199653074063
R
A: Key group name
B: Valid period of the key being used. If the key server is inaccessible, "Not Available" is displayed. If a valid period
is not set, a hyphen (-) is displayed.
C: Key status
D: Machine group name
E: Security level
F: Recovery mode
G: Valid period of the key. If a valid period is not set, a hyphen (-) is displayed.
H: Master server ID. If it is not set, a hyphen (-) is displayed.
I: Master server status
To Next Page
Loading...
