Fujitsu Eternus DX90 S2 - Appendix B List of Supported Commands; B.1 List of Supported Commands

ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
703
Appendix B
List of Supported Commands
An "x" mark indicates that the command is supported for the specified conditions.
B.1 List of Supported Commands
Table B.1 List of supported commands
Command name Host interface Slave
control
(*1)
Remarks
FC FCoE SAS iSCSI
Storage System Status
show status xxxxx
show enclosure-status xxxxx
show fru-ce xxxxx
show fru-de xxxxx
show disks xxxxx
show hardware-information xxxxx
Thin Provisioning Pool Management
set thin-pro-license x x x x
delete thin-pro-license x x x x
show thin-pro-license xxxxx
create thin-pro-pool x x x x
set thin-pro-pool x x x x
delete thin-pro-pool x x x x
show thin-pro-pools x x x x
show thin-pro-pool-progress x x x x
expand thin-pro-pool x x x x
format thin-pro-pool x x x x
set eco-thin-pro-pool x x x x
release eco-thin-pro-pool x x x x
show eco-thin-pro-pool x x x x
Flexible Tier Management
show flexible-tier-mode xxxxx
delete flexible-tier-pool x x x x
show flexible-tier-pools x x x x
show flexible-tier-pool-progress x x x x
set flexible-tier-sub-pool x x x x