Fujitsu Eternus DX90 S2 - Show Thin-Pro-Pools

Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > show thin-pro-pools
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
79
show thin-pro-pools
This command displays a summary list of all the Thin provisioning pools or the details of the specified Thin
provisioning pool(s).
■ Syntax
■ Parameter
■ Output
show thin-pro-pools [-pool-number pool_numbers | -pool-name pool_names ]
-pool-number
or
-pool-name
Optional. This parameter specifies the Thin provisioning pool identifiers. One or more Thin
provisioning pool identifiers can be specified. For details, refer to "1.2.5 Thin Provisioning Pool
Syntax" (page 20). If the Thin provisioning pool identifier is omitted, a summary list of all the
Thin provisioning pools is displayed.
#Thin Pro Disk RAID Status Total Used Used warn- Atten- Encryp-
#No. Name attribute Level Capa Capa status ing(%) tion(%) tion
#00
TPP01 Online RAID1+0 Available 100 TB 50 MB Normal 80 60 Enable
A B C D E F G H I J K
#<Raid Group List>
#
#Raid Group RAID Assigned Status Total Free Stripe
#No. Name Level CM Capa Capa Depth
#01 RG001 RAID1+0 CM#0 Spare in Use 500TB 250GB 128KB
#02
RG002 RAID1+0 CM#1 Available 500TB 250GB 128KB
L M N O P Q R S
A: Thin provisioning pool number
B: Thin provisioning pool name
C: Disk attribute that composes the Thin provisioning pool (Online/Nearline)
D: RAID level
E: Thin provisioning pool status
F: Total capacity of the Thin provisioning pool
G: Used capacity of the Thin provisioning pool
H: Alarm status (Normal/Warning/Attention)
I: Warning level range
J: Attention level range
K: Encryption status (Enable/Disable)
L: RAID group number
M: RAID group name
N: RAID level
O: Assigned CM
P: RAID group status
Q: Total capacity of RAID group (Unit: MB)
R: Free capacity of RAID group (Unit: MB)
S: Stripe Depth (Unit: KB) (Except for 64KB)