EasyManua.ls Logo

Fujitsu Eternus DX90 - Figure 6.1 Minisas Cable Connection (between the Controller Enclosure and Drive Enclosure Single Controller Model); Figure 6.2 Minisas Cable Connection (between the Controller Enclosure and Drive Enclosure Dual Controller Model)

Fujitsu Eternus DX90
239 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 Cable Connection
> 6.6 MiniSAS Cable Connection (For Drive Enclosures)
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
120
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
The following shows the miniSAS connection figure between controller enclosure and
drive enclosure.
- For single controller model
Figure 6.1 MiniSAS cable connection
(between the controller enclosure and drive enclosure)
(single controller model)
- For dual controller model
Figure 6.2 MiniSAS cable connection
(between the controller enclosure and drive enclosure)
(dual controller model)
I
MPORTAN
T
Do not connect anything to the SAS (OUT) port on the end edge.
Controller
enclosure
Drive
enclosure 1
CM#0
EXP#0
Controller
enclosure
Drive
enclosure 1
CM#1CM#0
EXP#1EXP#0

Table of Contents

Other manuals for Fujitsu Eternus DX90

Related product manuals