Fujitsu Eternus DX90 - A.2.2 Drive Enclosures; Table A.15 200 GB SSD Specifications; Table A.16 3.5 Type Drive Enclosure Specifications

Appendix A Specifications
> A.2 Optional Product Specifications
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
225
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
• 200GB SSDs
Table A.15 200GB SSD specifications
*1: Specification per one SSD.
*2: The capacity is calculated based on the assumption 1GB=1,000
3
Byte.
A.2.2 Drive Enclosures
■ For 3.5" type drive enclosures
Table A.16 3.5" type drive enclosure specifications
Item Specification
Model name ETLSS2HBU, ETLSS2MBU, ETLSS2PBU
Drive Interface Serial Attached SCSI (3Gbit/s)
Storage medium Flash memory
Capacity 200GB
Dimensions (W × D × H) 19 × 142 × 81 (mm)
Weight 0.3 kg
Item Specification
Model name ETLDE2AU ETLDE1AU
Drive interface Serial Attached SCSI (3Gbit/s)
Number of disk slots 12
Number of expanders 2 1
Dimensions (W × D × H) 483 × 650 × 88 (mm) [2U]
Maximum weight 35kg
Power
Voltage AC 100 – 120V, AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Maximum
power
consumption
AC 100 – 120V 370W
AC 200 – 240V 370W
Maximum heat
generation
AC 100 – 120V 1,332kJ/h
AC 200 – 240V 1,332kJ/h
Environmental
condition
Temperature 5 – 40°C (operating)
Humidity 20 – 80%RH (operating)