Fujitsu Eternus DX90 - Appendix B Events detected by ServerView; ServerView Event List

ETERNUS DX60/DX80/DX90 Disk storage system User Guide
229
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
Appendix B Events detected by ServerView
This chapter explains the ETERNUS DX60/DX80/DX90 events detected by ServerView.
Table B.1 ServerView event list
*1: The default setting is "Disable" (no notification).
The detected event notification settings can be changed via the GUI or CLI.
For details, refer to the "ETERNUS DX60/DX80/DX90 Web GUI User Guide" or "ETERNUS
DX60/DX80/DX90 CLI User Guide".
Event Severity
Specific TRAP
number
Meaning
Item fault CRITICAL 2 Hardware error occurred.
Item warning MAJOR 5
Preventive Maintenance Hardware
has been detected.
Sensor status changed CRITICAL 6
Temperature abnormality has been
detected.
Maintenance required CRITICAL 7
An error that requires maintenance
has been detected.
Information event
(*1)
INFORMATIONAL 9 Information
Item fault to normal
(*1)
INFORMATIONAL 22
"Item fault" type problem has been
resolved.
Item warning to normal
(*1)
INFORMATIONAL 25
"Item warning" type problem has been
resolved.
Sensor status changed
to normal
(*1)
INFORMATIONAL 26
"Sensor status changed" type problem
has been resolved.
Refer
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
"ETERNUS DX60/DX80/DX90 CLI User Guide"