68 ETERNUS LT20 S2
Remote Management Unit (RMU) Operating the LTO Library
– Support Phone – the phone number of the individual within your company to
contact for RMU or library support
– Support Email – the email address of the individual within your company to
contact for RMU or library support
Figure 52: Configuration, User page
4.4.6.6 Setting Date/Time
This page allows the user to set the time and date, and how it will be displayed.
You can reach this page by selecting Configuration → Date/Time.
● Time (24H) – Enter the current time. Using the 24-hour format, 1:00 pm
would be 13:00:00 (HH:MM:SS).
● Date – Enter the current date.
Clock Synchronization Configuration
● Enable Clock Synchronization – Click to enable or disable the SNTP server.
Click Help for further information.
● SNTP Server Address – Most NTP (Network Time Protocol) servers also
support SNTP (Simplified NTP). Click Help for further information.
● UTC Time Zone Offset – This shows current time zone selected. Select the
zone for your location from the pull down list.
● Enable Daylight Savings Adjustment – Enabling Daylight Savings will
advance the local time by one hour. Click Help for further information.
To Next Page
Loading...
