EasyManua.ls Logo

Fujitsu ETERNUS LT20 S2 - Magazine Does Not Unlock Via OCP or RMU

Fujitsu ETERNUS LT20 S2
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ETERNUS LT20 S2 89
Troubleshooting Magazine Does not Unlock via OCP or RMU
5.4 Magazine Does not Unlock via OCP or RMU
If you are not able to remove the magazines using OCP and RMU, an
emergency release mechanism is available.
V CAUTION
Use only in case of emergency!
1. Unplug the power cord from the library.
2. Find the access holes for the right and left magazines (see figure 69).
Figure 69: Access holes for the left and right magazine
3. To manually release the magazines, push the end of a straightened paper
clip into the access hole for the magazine at the back of the library. While
holding the paper clip, have a second person pull the magazine out of the
front of the unit (see figure 70).
No. Description
1 Right magazine release
2 Left magazine release

Table of Contents

Other manuals for Fujitsu ETERNUS LT20 S2

Related product manuals