Fujitsu ETERNUS LT20 S2 - Page 95

ETERNUS LT20 S2 95
Troubleshooting Tape Library Error Codes
95 Elevator outside range,
Elevator has reached a position
beyond the expected range
Run 'library Health Check',
after several occurrences
contact technical support
96 Rotation outside range,
Rotation has reached a position
beyond the expected range
Run 'library Health Check',
after several occurrences
contact technical support
97 Sled outside range,
Sled has reached a position
beyond the expected range
Run 'library Health Check',
after several occurrences
contact technical support
98 Cartridge present sensor not
found
Run 'library Health Check',
after several occurrences
contact technical support
99 Slider home sensor not found Run 'library Health Check',
after several occurrences
contact technical support
9A Rotation home sensor not found Run 'library Health Check',
after several occurrences
contact technical support
9B Sled position sensor not found Run 'library Health Check',
after several occurrences
contact technical support
9C Gripper range out of specification Run 'library Health Check',
after several occurrences
contact technical support
9D Slider range out of specification Run 'library Health Check',
after several occurrences
contact technical support
9E Elevator range out of specifi-
cation
Run 'library Health Check',
after several occurrences
contact technical support
9F Rotation range out of specifi-
cation
Run 'library Health Check',
after several occurrences
contact technical support
A0 Sled range out of specification Run 'library Health Check',
after several occurrences
contact technical support
Error Code Description User Action