Fujitsu ETERNUS LT60 S2 - Page 29

Chapter 1 Overview
1.2 References for Setup
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User’s Guide -Server Connection-
Copyright 2021 FUJITSU LIMITED P3AM-5322-12ENZ0
29
1.2.3.3 Fibre Channel Connection (Fabric Connection) for Windows
The following procedure explains how to connect the LT20 S2/LT40 S2/LT60 S2 to a Windows server with a
fabric connection.
Workflow
Setting Backup Software
Apply patches, set the robot driver, and set the backup software.
• Backup software used
- NetBackup
• "4.1 NetBackup" (page 47)
- IBM Spectrum Protect (IBM Tivoli Storage Manager)
• "4.3 IBM Spectrum Protect" (page 53)
- Backup Exec
• "4.4 Backup Exec" (page 54)
- NetVault
• "4.5 NetVault" (page 55)
- ARCserve Backup
• "4.6 ARCserve Backup" (page 65)
- Veeam Backup & Replication
• "4.7 Veeam Backup & Replication" (page 66)
Refer
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT20 S2/LT40 S2/LT60 S2.
- "1.1 Operating Environment" (page 17)
Refer