7.2 Adding the DHCP Server Component and Creating a Scope
fi-6010N Network Scanner Associated Servers Setup Guide 71
7
13. Specify the DNS domain name of the Active Directory domain that the client belongs
to and the IP address of the DNS server used for that DNS domain.
To specify by host name, enter the Active Directory domain name for "Parent domain", and
the host name of the DNS server for "Server name", then click the [Resolve] button.
⇒ The IP address of the DNS server is input in the "IP address" on the right.
14. Click the [Add] button.
⇒ The IP address is added to the list.
15. Click the [Next] button.
HINT
In this scanner, two DNS servers can be set.
To Next Page
Loading...
