Fujitsu FI-6010N - Setting the Proxy Server

94
4.7.7 Setting the Proxy Server
1. Select the [Network Settings] tab on the top menu.
2. Select the [Proxy Server] tab on the left side menu.
 The "Proxy Server" screen appears.
3. Use the "FTP Proxy Server" option to set whether or not a proxy server is used for
FTP server connection.
The default setting is [Off].
Select [On] to enable FTP connection via a proxy server.
1 Enter the proxy server IP address, host name, or FQDN in the "Address" input
field.
z For an IP address
The following format should be used xxx.xxx.xxx.xxx (xxx is a value from
0 to 255).
z For a host name or FQDN
Up to 255 characters may be entered.
ATTENTION
With the Admin Tool, set whether a proxy server is used when connecting
to SharePoint server. This can not be set from the LCD touch panel or Cen-
tral Admin Console. In this section, the Admin Tool screen is used as an
example.