Fujitsu FI-6010N - Cloning a Job Sequence; Editing a Job Sequence

4.11 Setting Job Features
fi-6010N Network Scanner Operator's Guide 193
4
■ Cloning a job sequence
This section describes how to clone a job sequence.
1. Select the [Job Sequences] tab.
 The "Jobs List" window appears.
2. Select the job sequence to be cloned.
3. Select the [Clone] button.
 The "Job Details" window appears.
4. Clone the detailed job sequence settings.
5. Select the [OK] button.
 A job sequence is added to the "Jobs List" window.
■ Editing a job sequence
This section describes how to edit a job sequence.
1. Select the [Job Sequences] tab.
 The "Jobs List" window appears.
2. Select the job sequence to be edited.
3. Select the [Edit] button.
 The "Job Details" window appears.
4. Edit the detailed job sequence settings.
5. Select the [OK] button.
 The settings of the job sequence are changed.