230
z If the Central Admin Server software is already installed, skip to "5.4.2
Installing the Central Admin Console" (page 233).
z When installing the Central Admin Server over an older version of the soft-
ware, all of the old Central Admin system settings should be automatically
reused. However, as a precaution, it is still recommended that the old set-
tings be backed up before proceeding with the upgrade installation. To
back up the Central Admin settings, refer to "5.17.1 Backing Up Central
Admin Settings" (page 287).
z Make sure that the Central Admin Server date and time values are set cor-
rectly. If the date/time difference between the values set in the server and
actual values is large, normal operation may not be possible.
z After the Central Admin Server software is installed, a Windows user
account (Account name: iSCentralAdmin) is added. This user is required
for Central Admin, therefore, do not change or delete the account.
z For details of the operating environment when installing the Central Admin
Server software, refer to "1.4.3 Requirements for Central Admin Server"
(page 13).
z When installing the Central Admin Server software, the same necessary
pre-settings before logging in with the Admin Tool are required. For more
details, refer to "4.4 Setting up for Administrator Access via the Admin Tool"
(page 43).
z To install the Central Admin Server software on Windows Server
® 2008,
login as an administrator. Do not install with Administrators group rights.
z If the following error message appears, installation was not successful.
An installation package for the product Microsoft
SQL Server Native Client cannot be found. Try the
installation agent using a valid copy of the
installation package 'sqlncli.msi'.
In this case, uninstall "SQL Server Native Client". Then, try installing the
Central Admin Server software again.
z If the installation process fails and the following error message appears,
stop the IIS service and re-start manually. Then, re-install the Central
Admin Server software.
The installation process was canceled because the
system was busy. Try restarting the Installation
Wizard again later.
z If the following error message appears in Windows Server
® 2008, check
that IIS Management Console is installed. If IIS Management Console is
not installed, select and install IIS Management Console in "Role Services".
Installation requires that the IIS Management
Console be installed.
Refer to the manual for details.
To select the role services for IIS, point to [Administrative Tools] - [Server
Manager], select Web Server (IIS) in "Roles Summary".
To Next Page
Loading...
