6.4 Sending the Scanned Data by e-Mail
fi-6010N Network Scanner Operator's Guide 313
6
6.4 Sending the Scanned Data by e-Mail
The "Main Menu" screen is shown again.
z The maximum size for an attachment is the size that has been set by the
administrator. To change this setting, contact the administrator. For more
details about this setting, refer to "4.7.11 Setting the e-Mail Server (SMTP
Server)" (page 112).
z For photos and images, a high compression level can be used to create a
smaller file. For more details, refer to "6.9.9 Compression" (page 378).
z If the file format is JPEG or TIFF, a file will be attached for each page in
the scan.
z If the number of pages is over ten and the [Scan Viewer] is On, a
confirmation dialog will appear after the "Send e-Mail" screen [Send]
button is pressed.
z If the number of pages is over ten and the [Scan Viewer] is Off, a
confirmation dialog will appear after the "Send e-Mail" screen
[Scan&Send] button is pressed.
z If the e-mail fails to send, an error message with the following title is sent
by e-mail from the scanner to the "From" address.
Network Scanner (XXXX) Error
To Next Page
Loading...
