Fujitsu FI-6010N - Page 369

6.6 Printing the Scanned Data
fi-6010N Network Scanner Operator's Guide 333
6
6.6 Printing the Scanned Data
4. Press the [OK] button.
 This returns you to the "Print" screen.
5. Make any required print setting changes.
[Scaling], [Positioning], and [Simplex/Duplex] settings can be changed. For more details
refer to "6.6.1 Scaling" (page 336), "6.6.2 Positioning" (page 341), and "6.6.3 Simplex/
Duplex" (page 343).
To return to the print setting to the factory settings, press the [Default] button.
According to the printer, settings from the printers properties screen may be used instead.
6. Enter a number in "No. of Copies" field.
The default number is 1. Numbers from 1 to 99 can be used.
According to the printer, settings from the printers properties screen may be used instead.
HINT
2
z User authentication may sometimes be required to access a network
printer. When the authentication is required, the "Print Server Authentica-
tion" screen appears. The authentication procedure follows.
1. Enter a "User Name" and Password" for the printer.
2. Press the [OK] button.
z Current user printing privileges for the specified printer are checked
before printing. When printing privileges are being checked, data may be
spooled temporarily.