Fujitsu FI-6010N - Purchasing the Carrier Sheet

7.6 Replacing Parts
fi-6010N Network Scanner Operator's Guide 435
7
7.6.5 Purchasing the Carrier Sheet
If the "Carrier Sheet" provided with the scanner can no longer be used for scanning due to damage
or wear-and-tear, you can purchase a new Carrier Sheet separately.
As a guideline, it is recommended to replace the Carrier Sheet every 500 scans.
However, the number of times of use differs according to usage. Replace the Carrier Sheet when it
becomes scratched or dirty.
The Carrier Sheet is as shown below:
To obtain the Carrier Sheet, contact your FUJITSU dealer or an authorized FUJITSU scanner ser-
vice provider.