Fujitsu fi-7460 - Operational

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
113
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Temporary Errors
The following are lists of temporary errors which can be
recovered by operators.
■ Paper Feeding Errors
Error codes beginning with the letter "J" are displayed.
Error
code
Error messages Action
J0:37 Paper protection
(feeding noise)
Remove and
check the
document, and
then try again
carefully.
1 Remove the jammed document.
For details, refer to "7.1 Paper Jam"
(page 110).
2 Check if the document is suitable for
scanning by ADF.
For details, refer to "2.2 Documents for
Scanning" (page 41).
3 Press the [Menu] button on the
operator panel, select whether to
enable or disable the document
protection function, and then press the
[Scan/Enter] button or perform a scan
from the computer.
J0:51 Paper protection
(feeding
accuracy)
Remove and
check the
document, and
then try again
carefully.
1 Remove the jammed document.
For details, refer to "7.1 Paper Jam"
(page 110).
2 Make sure that documents that are
folded or documents that do not
conform to the paper specifications,
such as thin paper, are not included.
For details, refer to "2.2 Documents for
Scanning" (page 41).
3 Press the [Menu] button on the
operator panel, select whether to
enable or disable the document
protection function, and then press the
[Scan/Enter] button or perform a scan
from the computer.
J1:31
J1:5A
Paper jam
Remove and
check the
document, and try
again.
1 Remove the jammed document.
For details, refer to "7.1 Paper Jam"
(page 110).
2 Check if the document is suitable for
scanning by ADF.
For details, refer to "2.2 Documents for
Scanning" (page 41).
3 Clean the rollers.
For details, refer to "Chapter 5 Daily
Care" (page 91).
J1:50 Pick error
Remove and
check the
document, and try
again.
Error
code
Error messages Action