How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Operational
Settings
Appendix
Appendix
Glossary
Introduction
Index
Contents
191
How to Load
Documents
Scanner
Overview
TOP
*1: Long page scanning supports documents with a length of up to 5,588 mm (220 in.) when the resolution is set to 200 dpi or less.
*2: When scanning plastic cards from the ADF, you can load up to 3 cards in the ADF paper chute (feeder).
*3: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*4: The capacity varies depending on the paper weight.
For details, refer to "2.2 Documents for Scanning" (page 41).
*5: Use the USB cable that is supplied.
When connecting the USB cable to a USB hub, make sure you connect it to a USB hub that is connected to the USB port of a computer.
Connection with USB 3.0/2.0 requires the USB port and the hub to support USB 3.0/2.0. Also note that the scanning speed slows down when USB 1.1 is
used.
Output
resolution
Binary (black &
white)
50 to 600 dpi, 1200 dpi 50 to 600 dpi: configurable in 1 dpi
increments
1,200 dpi: created by scanner driver
Grayscale
Color
Grayscale
level
Binary (black &
white)
1-bit 12-bit for each color during internal
processing
Grayscale 8-bit
Color 24-bit
Interface USB 3.0/2.0/1.1 (*5) B Type
LCD Display: FSTN (black & white)
Displayed dots: 110 × 65 dots
Displayed lines: 5 × 16 (row × column)
Comes with a backlight
Item Specification Notes
fi-7460 fi-7480
To Next Page
Loading...
