Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
37
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
4 Adjust the side guides to the width of the documents.
Do not leave space between the side guides and the documents.
Otherwise, the documents may be fed skewed.
5 Scan the documents with the image scanning application.
For details, refer to the image scanning application manual.
■Loading Documents to the Left or Right Side of
the ADF Paper Chute (Feeder)
1 Pull out chute extension 1 and lift up chute extension 2
according to the length of the documents.
For details, refer to "1.5 Setting Up the ADF Paper Chute (Feeder)"
(page 22).
2 Bring down the stacker and pull out stacker extension 1
and stacker extension 2 towards you according to the
length of the documents.
For details, refer to "1.6 Setting Up the Stacker" (page 23).
3 Slide the side guides fully outward.
To Next Page
Loading...
