Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
47
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Paper Size
When you scan a mixed batch with different sizes, not feeding the
documents straight may cause troubles such as paper jams or part of
the image to appear missing.
It is recommended that you check the documents thoroughly before
scanning and also check the image if the document was skewed.
Documents That Cannot Be Scanned in a Mixed Batch
The following types of documents cannot be mixed in the same batch:
Carbonless paper
Bond paper
Perforated documents
Thermal paper
Carbon-backed paper
OHP film
Tracing paper
ATTENTION
When a mixed batch with different sizes is scanned, documents are
more likely to skew because the side guides do not contact every
sheet.
Do not use [Check Length] or [Check Overlapping and Length] for
multifeed detection.
To Next Page
Loading...
