How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
58
How to Load
Documents
Scanner
Overview
Cleaning the scanner You can clean the scanner by using Cleaning
Paper, Cleaning Wipe, or cloth.
For more details, refer to "Chapter 5 Daily Care"
(page 91).
2: Cleaning Yes Yes
Test print for Imprinter You can run a test print when the imprinter is
installed.
For more details, refer to the fi-748PRB Imprinter
Operator's Guide.
3: Test Print Yes Yes
Checking and resetting the
sheet counter
You can check the replacement cycle of the
consumables and the total page count.
Also use it to reset the counter when you have
replaced the consumables or performed cleaning.
For more details, refer to "Checking and Resetting
the Sheet Counters" (page 63).
4: Consumable counters Yes Yes
Counting documents You can count the number of scanned documents
in Doc Counting Mode.
For more details, refer to "Counting Documents"
(page 64).
11: Doc Counting Mode Yes Yes
Operation Description Item User
menu
Administrator
menu
Yes: Available
-: Not Available
To Next Page
Loading...
