How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
59
How to Load
Documents
Scanner
Overview
■Checking the Guidance Contents
1 Press the [Power] button on the operator panel.
The [Ready] screen is displayed on the LCD.
2 Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
3 Press the [] or [] button and select [Guidance], then
press the [Scan/Enter] button to confirm.
The [Guidance] screen is displayed on the LCD.
4 Press the [] or [] button and select [1: Clear counter],
then press the [Scan/Enter] button to confirm.
The [Clear counter] screen is displayed on the LCD.
5 Press the [] or [] button to check the contents of the
guidance.
You can check the way to reset the page counter.
Me
n
u
Scan/Enter
Che
ck
Powe
r
Stop/Clear
2 [Menu] Button
3 []/[] Button
[Scan/Enter] Button
5 []/[] Button
1 [Power] Button
4 []/[] Button
[Scan/Enter] Button
To Next Page
Loading...
