How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Daily Care
Operational
Settings
Chapter 5 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
96
How to Load
Documents
Scanner
Overview
9 Adjust the side guides to the width of the Cleaning Paper.
Do not leave space between the side guides and the Cleaning Paper.
Otherwise, the Cleaning Paper may be fed skewed.
10 Press the [Scan/Enter] button.
The Cleaning Paper is fed and ejected onto the stacker.
11 Reset the cleaning counter.
Reset the counter by performing one of the following actions:
Reset the counter in [4: Consumable counters] on the [Settings
Menu] screen of the operator panel.
For details, refer to "3.2 Settings Menu" (page 55).
Reset the counter in the Software Operation Panel.
For details, refer to "Resetting the Sheet Counters" (page 160).
To Next Page
Loading...
