Location and Frequency
Cleaning should be performed approximately every 10,000 [fi-7800]/12,000 [fi-7900] sheets scanned. Note
that this guideline varies depending on the types of documents you scan. For instance, it may be necessary to
clean the scanner more frequently when you scan documents on which the toner is not sufficiently fused.
Cleaning Location Cleaning Sheet Cloth Sprayed with Cleaner F1/Cleaning
Wipe
Pick Roller ○ ○
Separator Roller ○ ○
Brake Roller ○ ○
Feed Roller ○ ○
Assist Roller ○ ○
Pinch Roller ○ ○
Paper Path ○ ○
Sheet Guide/Glass — ○
Document Sensor — ○
Friction Pad — ○
○:Cleanable
—:Not cleanable
ATTENTION
Cleaning cycles may vary depending on the condition of the documents. Also, cleaning must be performed
more frequently when the following types of documents are scanned:
● Smooth-faced documents such as coated paper
● Documents with printed text/graphics that almost cover the entire surface
● Chemically-treated documents such as carbonless paper
● Documents containing a large amount of calcium carbonate
● Documents written in lead pencil
● Documents on which the toner is not sufficiently fused
Daily Care
117
To Next Page
Loading...
