3 Adjust the offset/vertical magnification as necessary.
Offset Setting Description
Unit Select [ADF (front)] or [ADF (back)] as the unit for an
offset adjustment.
Main Adjusts the horizontal (width) offset.
The setting range is from -2 to 3 mm in 0.5 mm
increments.
Sub Adjusts the vertical (length) offset.
The setting range is from -2 to 3 mm in 0.5 mm
increments.
Vertical magnification Adjustment Description
Unit The unit for a vertical magnification adjustment is
fixed to [ADF].
Vertical magnification Adjustment
(length)
Adjusts the vertical (length) magnification.
The setting range is from -3.1 to 3.1% in 0.1%
increments.
Operational Settings
224
To Next Page
Loading...
