Setting the Speed to Feed the Documents [Pick Speed]
When you experience frequent multifeeds and paper jams, the symptom may be improved by slowing down the
speed at which the documents are fed (pick speed).
This setting is effective for scanning thin papers.
1 Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page 193).
2 From the list on the left, select [Device Setting 2] → [Pick Speed].
3 Select the paper feeding speed (pick speed).
Normal
Normal paper feeding speed
Slower
Slower than normal paper feeding speed
ATTENTION
Note that it takes more time for scanning as the paper feeding speed slows down.
HINT
This setting can also be configured from the operator panel.
Operational Settings
234
To Next Page
Loading...
