Troublesho ot ing and tips
The LCD screen is difficult to read
LCDscreenLC Dscreen
Cause Troub leshooting
Reflected glare ► Turn the notebook or alter the tilt of th e LCD
screen.
► Increase the brightness of the screen.
The external monitor rem
ains blank
Monitor
Cause Troub leshooting
Monitor i s switched off. ► Switch the external monitor on.
Power s aving has been activated (monitor is
blank).
► Press any key to continue.
Brightness is set t o dark.
► Adjust the brightne
ss of the monitor.
Screen output is set to the notebook’s LCD
screen
► Press the key c ombi
nationtoswitchthe
screen output, see
"
Key combinations",
Pag e 24.
The external moni
tor’s power cable or data
cable is not conn
ected properly.
► Switch off the e xternal monitor and the
notebook.
► Check whether the power cable is plugged
properly into the externa l m onitor and into
the power socket.
► Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a c onnector).
► Switch on the external monitor and the
notebook.
The external monitor is blank or the image is unstable
ScreenMonitor
Cause Troub leshooting
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
► Terminate the application program in
Windows by pressing
Alt
+
F4
.Ifthe
fault persists after closing th e program, use
the key comb ination for switching the screen
output (see "
Key combinations", Page 24)to
switch over to the notebook’s LCD screen.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
Fujitsu 63
To Next Page
Loading...
