Troublesho ot ing and tips
The printer does not print
Printerdoe s notprint
Cause Troub leshooting
The printer is not switched on. ► Make sure that th e printer is sw
itched
on and ready for ope ration (ref
er to the
documentation s upplied with t
he printer).
The printer is not connected c
orrectly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or n ot correctly
installed, or it is th e wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whethe r the correct printer driver is
loaded (refer to the printer documentation).
The radio connectio
n to a network does not work
Theradioc onnecti
ontoa network doesnot w ork
Cause Troub leshooting
The wireless compo
nent is disabled.
► Switch the radio component on (see
"
Switch ing the wireless components on and
off", Page 40).
The wireless component is enabled. Despite
this, the wireless connection to a network doe s
not w ork.
► Check whether the radio connection is
switched on via the softwa re.
► Further information on using the radio
component can be found in t he help files.
Acoustic war
nings
Acousticer
rormessages
Errors
Cause
Troubleshooting
A beep sounds every few seconds.
The battery is almost flat.
► Charge the battery.
Error messages on the screen
Errormess agesont he screenErrormessage:
This section describes the error messages generated by the BIO S Setup. Error messages displayed
by the operating system or programmes are described in the r elevant docum entation.
If the error me ssage appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Fujitsu 65
To Next Page
Loading...
