Fujitsu LIFEBOOK AH532 - Item Specific Help; Hard Disk Security

12
STYLISTIC LH532/AH532 BIOS
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu allows you to set hard disk security parameters.
Figure 7. Hard Disk Security Submenu
Table 7: Fields, Options and Defaults for Hard Disk Security Submenu
Menu Field Options Default Description
Drive0 Password Is:
----
Clear Display-only field.
Set Drive0 Password:
----
[Enter] Allows you to set the Drive0 Password. The hard disk is locked
with the password. Data in the locked disk cannot be read on
other systems.
Password Entry On
Boot:
 Disabled
 Enabled
[Enabled] When disabled, Hard Disk Password entry is not required
before OS boot. The hard disk is still password-protected with-
out password entry.
Phoenix SecureCore Tiano Setup
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Security
Item Specific Help
Configure had disk
security feature.
Drive0 Password Is: Clear
Set Drive0 Password [Enter]
Password Entry on Boot: [Enabled]
Hard Disk Security
Dowadge-Sinanju BIOS-test.fm Page 12 Sunday, September 16, 2012 2:28 PM