69
- Memory Upgrade Module
Checking the Memory Capacity
Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your notebook has recognized the change.
Check the memory capacity by clicking [Start] -> Control Panel -> System and Maintenance ->
System. The amount of memory is displayed next to “Memory - RAM:”
Removing a Memory Upgrade Module
1 Perform steps 1 through 4 of Installing a Memory
Upgrade Module.
2 Pull the clips sideways away from each side of the
memory upgrade module at the same time.
3 While holding the clips out, remove the module from the
slot by lifting it up and pulling it away from your notebook.
4 Store the memory upgrade module in a static guarded
sleeve.
5 Replace the cover and reinstall the screws.
Figure 32. Removing memory module
To Next Page
Loading...
