150
- Creating and converting 3D videos and images
Converting 2D images to 3D
1 When you have identified a 2D image that you would like to view in 3D, simply right-click on the image file and
select “Play with TriDef Software”. The TriDef 3D Media Player window will open with the file as a 2D image.
The window looks like a traditional media player, but in the case of TriDef, it is used as a slide show viewer.
(See “Viewing a Slide Show” on page 150.)
2 At the bottom of the TriDef 3D Media Player window is a bar containing a variety of control tools. Click on the
[3D] button to convert the displayed 2D image in 3D.
3 After the image has been converted to 3D, you can change the 3D Screen Depth and Percent in Front using
the two small slider bars to the left of the [3D] button.
4 To convert a 3D image back to a 2D image, click on the [3D] button again.
Viewing a Slide Show
Using TriDef, you can view a number of images in a folder as a slide show. The tools at the bottom of the
TriDef window work much the same as they would when viewing a movie, except they are used to help
you navigate through a slide show. For example, the Play/Pause button on the left plays and pauses the
slide show. Previous and Next buttons show the previous and next photo in the slide show. When viewing
a slide show, each photo is displayed for a few seconds. The Progress bar indicates how long the photo is
displayed, and the Loop button lets you automatically re-start the show when it completes.
THE TWO-DIMENSIONAL FILE FORMATS THAT CAN BE CONVERTED TO 3D BY THE TRIDEF 3D
APPLICATION INCLUDE: .BMP, .JPG, ‘JPEG, AND .PNG. NOTE THAT THE CONVERTED FILES CANNOT BE
SAVED IN 3D FORMAT.
To Next Page
Loading...
