Working with the notebook
Inserting the c ard
Keep the placeholder for the slot in a safe place. When you remove the card again, you
must reinstall the place holder. This prevents foreign objects from get ting into t he slot.
1
2
► Press the edge of the placeholder (1)
to make the card placeholder protrude
from the notebook’s case.
► Pull the card placeholder out of the slot (2).
► Insert the card into the slot guide with
the connection contacts first.
► Gently push the card into the slot until you
feel it click into place. Do not use any force.
Depending on the particular t ype used, the
card may protrude slightly from the slot.
Please see the documentation relating to the card for driver installation instructions.
36 Fujitsu Technology Solutions
To Next Page
Loading...
