Security functions
Trusted P latform Module (TPM) (device-dependent)
TPMTrustedPlatform Module
To use the TPM, you must activate the T PM in the BIOS Setup before the softwar e
is installed. The condition for this is that you have assigned at least the sup ervisor
password (see "
Secu rity f unctions", Page 41).
Enabling TPM
• Requirement: You have assigned a supervisor pa ssword, see "Security function s", Page 41.
► Ca ll up the BIO S Setup an
d select the Security menu.
► Mark the TP M S ecu rity Chip Setting field and press the Enter key.
► Select Enabled to acti
vate the TPM.
Once you have activated the TPM the Clear Security Chip option appears.
Select Clear Securit
y Chip to delete the holder in the TPM. By clicking on Enabled,
all secret ke ys (e.g
. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by
applications are deleted.
Please note that yo
u will then no longer b e able to access the data you have
encrypte d with th
e keys based on that holder.
► Select the Exit Sa
ving Changes option in the Exit menu.
► Press the Ent er k ey a nd select Yes.
The notebook wil
l restart, and T P M will be e nabled after the reboot.
Disabling TPM
• Requirement: You have assigned a supervisor pa ssword, see "Security function s", Page 41.
► Call up the BIO S S e tup and select the Security menu.
► Mark the TP M S ecu rity Chip Setting field and press the Enter key.
► Select Disabled to deactivate the TPM.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Ent er k ey a nd select Yes.
Your not ebook will now restart and TPM will be disabled.
44 Fujitsu Technology Solutions
To Next Page
Loading...
