Removing and installing components
during servicing
Preparing to remove components
If you are going to remove or change system components, prepare for the removal as follows:
Please ob se rve the safety information in c hapter "Important notes", Page 12.
Remove the power plug from the m ains outlet !
► Switch the device off.
The device must not be in energy-saving mode !
► Close the LCD screen.
► Remove all the cables
from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent th e device from being scratched.
► Rem ov e the battery
(see "
Removing the battery", Page 30).
Fujitsu Technology Solutions 53
To Next Page
Loading...
