Removing and installing components
during servicing
Installing a memory m odule
2
a
1
► Insert the memory m odu le with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Removing and installing the hard disk
Both hard disks are l
ocated in the same service compartment.
Removal and install
ation are th e s ame for both hard disks. Below, removal and
installation are d
escribed using the example of the left-hand hard disk.
Removing a hard disk
1
1
3
2
► Remove the screws (1).
► To remove the hard disk from the ports, push the hard disk in the direction of the arrow (2)
► Remove the hard disk from the hard disk compartment (3).
56 Fujitsu Technology Solutions