First-time setup of you r device
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e. g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device he ats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 1 00 mm away from the device and its
mains adapte r to en sure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environme ntal conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingf or operationMainsadapt er
Observe the safety precautions in the enclosed "Safety" manual.
The supplied power cable conforms to the requirements of the count ry in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which yo u intend to use it.
3
1
2
► Connect the power cable (1) to the
mains ada pter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the de vice.
16 Fujitsu Technology S olutions
To Next Page
Loading...
